This article is for whoever sets up scanning at the school gate. You don’t need special AnySchool hardware, and staff don’t need to use their own phones. Scan cards works with a device the school owns, and with card readers you can buy in any computer market.
To print the cards and scan them, see Print ID cards and scan them for attendance.
Choose how you will scan
- A school tablet’s camera. An Android tablet or phone the school owns, with Chrome. Good for small schools, or to try it out first.
- A handheld QR scanner. A 2D barcode scanner plugged into a laptop or an Android tablet. Best for most schools.
- Chip cards and a chip reader. Plastic chip cards, a card printer and a USB chip reader, for schools that want tap-to-scan.
We suggest the handheld QR scanner. It reads the QR code on the cards you already print, a scan takes under a second, and it keeps working in bright sun at the gate, where cameras often struggle.
Use a school tablet’s camera
- Sign the tablet in as the staff member on gate duty.
- Open Attendance, then Scan cards, then press Start the camera.
- Stand the tablet at chest height, out of direct sun, with the back camera facing where students hold up their cards.
Use Chrome on Android. Some browsers, including Safari on iPhone and iPad, can’t read QR codes on this page. Use a handheld scanner with those.
Buy a handheld QR scanner
- A 2D scanner. The box says “2D”, “QR” or “QR code”. A “1D” or “barcode only” scanner can’t read the card.
- USB, or Bluetooth with “HID” or “keyboard” mode. The scanner types what it reads, as if someone typed it on a keyboard. Almost every scanner works this way out of the box.
- A stand (optional). With a stand, students hold their card under the scanner and staff keep their hands free.
Connect the scanner
- Laptop or desktop: plug the scanner into a USB port. There’s nothing to install.
- Android tablet: plug it in with a USB OTG adapter (USB-C or micro-USB to USB-A), or pair a Bluetooth scanner in the tablet’s Settings › Bluetooth.
Test the scanner
- Open Notepad, or any notes app, and scan a student’s card. You should see a web address ending in a long code, then the cursor moves to a new line.
- If you see strange characters, or the line doesn’t end, look in the scanner’s manual for the setup barcodes for US keyboard and Enter after each scan, and scan them.
- Open Attendance, then Scan cards. Click once in the Card code or chip ID box and scan a card. The student shows as Present or Late.
Keep the cursor in that box while you scan. If someone clicks elsewhere on the page, click back in the box.
Use chip cards instead
Chip cards (RFID or NFC) let a student tap their card on the reader instead of showing a QR code. You’ll need:
- Cards and a reader that match. Chips come in two common kinds: 125 kHz (often sold as “EM” or “proximity”) and 13.56 MHz (often sold as “MIFARE” or “NFC”). A reader reads only its own kind, so buy both together.
- A USB reader in keyboard mode. Like the QR scanner, it types the chip’s number and presses Enter.
- A way to print on plastic. Chip cards are plastic, so you need a card printer, or a printing shop that prints on blank chip cards. The design is the same size as the paper card.
Link each chip card once
- Open Scan cards, then Link a chip card to a student.
- Enter the student’s card code, click in the chip box, tap the card on the reader, and press Link.
After that, a tap on the reader at the gate marks the student present.
Link the cards with the same model of reader you use at the gate. Different readers can type the same chip’s number differently.
Something isn’t working
- Nothing happens when I scan. Click in the Card code or chip ID box first, then scan again.
- It says the card isn’t recognised. Test the scanner in Notepad. If the address looks right, the card may belong to another school, or the student has left.
- The camera won’t read cards outdoors. Move out of direct sun, or use a handheld scanner.
- The internet is down. Scans need a connection to record. Take the register in the classroom instead; it works offline and sends when the connection is back.